Welcome to visit us in Pauma China 2024
In the last piece, we learned how the length of metal hose affect the work. While this time let’s learn how to choose the right length for metal hose.
How to confirm the length of the metal hose
The length of the metal hose depends on the pipe diameter. For the pipeline system, if the primary amount of the compensator is short, a second or a third one can be used. While the number may limit due to the adapt of the space position. Then you can use a duplex structure.
Outlet pipe length depends on diameter, 100 mm or less. One refers to the length of the deflection part of the metal hose. While the other one refers to its diameter or length. The length of the angular displacement metal hose is related to the actual bend radius.
The length of the metal hose is related to its actual bend radius. Note: The tangent section refers to the section of two pipe fittings. While they have the same radius and different directions when the metal hose is displaced laterally. Path length is often in consider.
The length of the metal hose on the parallel section depends on the actual bend radius. For the length of the flexible section of the metal hose, DN is its diameter. While v is the angle and y is the single lateral displacement.
In this piece, we learned the length of metal hose. If you have any questions please just contact Orient. We are an expert in hose and will offer you the best solution.
Related posts
