Function of industrial hose in electroplating technology
1. After the assembly, don not straight the hose, but keep it loose. Because under the action of pressure, the length of the hose will change. While the range of change is -4% to +2%.
2. When installing and connecting the hose, no matter in a natural state or in a moving state, its bending radius can not be less than the min bending radius of the hose. Besides, the bending radius of the hose should be far away from the hose joint.
3. The hose should have a larger bending radius when moving.
4. Choose a suitable joint. Make the bending plane of the hose and the direction of movement in the same plane to avoid twisting.
5. At different bending transitions of the hose, use pipe clamps reasonably to avoid hose twisting.
6. The hose can not be twisted during installation. Because it has a tendency to twist straight under high pressure, the joint nut will loosen. In severe cases, the hose will break at the strain point.
7. When connecting the hose, a suitable length should be left, and the bending part should have a relatively large bending radius.
8. Choose a suitable joint to avoid small bending radius and additional stress.
9. Make reasonable use of installation space and avoid using extra hoses.
10. Avoid direct contact of hoses with other objects or keep them away from other objects to reduce friction.
#hydraulic hose# #hydraulic hose assembly#
Related posts
