Consider these factors to choose a paint spray hose
1. Do not contact or bring the hose close to open flames.
2. Avoid vehicles running over the hose and heavy objects squeezing it.
3. When cutting the steel wire hose, pay attention to the wire leaking out of the end. Because it may cause injury.
Assembly
1. Select the connector of the hose size.
2. When installing the matching use, please process the end of the hose to its original shape.
3. When installing the connector into the hose, please apply grease on the connector and the hose, and do not burn it with fire. If it cannot be installed, you can heat the hose with hot water and then install it into the connector.
4. When tightening, leave enough room to prevent damage to the hose.
Regular inspection and abnormality
1. During the use of the hose, please be sure to implement a regular inspection system.
2. The service life of the hose is affected by the temperature, flow rate, pressure, amplitude frequency of the carrier. Therefore, if there are any abnormal signs, it should be stopped and replaced immediately.
Storage
1. After using the hose, clear the residue inside.
2. Place it indoors or in a dry and ventilated place.
3. Try to enlarge the packaging size.
4. The storage hose should be at least 1m away from the heat source. No ozone, electric sparks or discharge equipment should be generated nearby.
5. Avoid direct sunlight and light.
Related posts
