Is it the time to change your oil cooler hose?

You are here:

Home
BLOG
Is it the time to change your oil cooler hose?

Before we talk about our today’s product, we want to say something to all of our dear readers, the purposes of we wrote our website articles are not only for introducing our products to you, but also we want to get feedback from you as well. While we wrote these articles we keep considering what you wanted to know and what are you interested in. We do not want to only share the information about our products’ specifications, we want something more to show you our value and our differentiation. Maybe what we did is not enough, and we keep updating, you are very welcome to give us some advise to us.

The product specifications of Oil Cooler Hose SAE J1532

This piece will introduce Oil Cooler Hose SAE J1532 to you. You might not familiar with this type of hose, thus we are here to explain the hose’s structure, application, characteristic, sizes, working pressure etc. to you. The oil cooler hose’s tube is made of black oil resistant synthetic rubber. The customer can choose the external braided yarns or external braided steel wire. The oil cooler hose SAE J1532 is widely used for automatic transmission fluid and other lubricating oil systems. Thus, the tube has an excellent performance on oil resistance. And the external braided yarns or braided steel wire will protect the tube. We, Orientflex has a strict quality control, thus the quality of each product manufactured by us is guaranteed. We manufactured Oil Cooler Hose SAE J1532 is anti-aging, corrosion and heat resistant. It is able to work from -40 ℃ to 150 ℃. The life span of oil cooler hoses mostly is shorter than other rubber hoses that mainly due to the oil cooler hoses need to constantly in contact with superior heat substance, then quickly cool down while no hot oil is conveying. Because of the extreme strict working environment of oil cooler hose, the quality control is important. We can guarantee the product’s quality for you. The size is from 5.56 mm to 28.5 mm, and the working pressure is from 5.2 MPa to 7 MPa. It is understandable that a larger size of the hose is able to take a smaller working pressure.

How do you know it is the time to change the oil cooler hose?

While you parked your car, and you noticed there are black stains beneath your car, then the oil slick might be caused by the leakage of your oil cooler hose. As we talked about before the reasons why the lifespan of the oil cooler hose is averagely shorter than other rubber hoses. Due to the extreme working environment, finally the part of oil cooler hose will harden and begin to crack, afterwards the leakage will happen to the oil cooler hose. The oil cooler hose lasts time is just like the engine, eventually it will damage. By the time, the oil cooler hose will start to be aging, that we can not avoid it. For noticing the failure signal, we should regularly check and inspect the hose visually, thus we can find the damages in a earlier stage and repair it. Otherwise, the leakage of oil cooler hoses will lead to the engine shortens the oil, that will cause the friction and damage of the internal parts of the engine. The failure signals of the oil cooler hose include oil leakage, low oil level light is on, the engine is hotter than normal time, etc. If we found the problems, we can fix the issues in time.

We hope this article provide you some useful information and knowledge about oil cooler hoses. If you need more information or you are interested in purchasing any auto rubber hoses or silicone hoses, you can choose to cooperate with us. We can provide you our quality hoses. Welcome to leave us a message and tell us your requirements.