Aeration hose adopts new micro molecular material tube. While the atomization effect ranked first in all types of aeration tube. Its working principle is: by air compressor pump pressure, uniform aeration tube expands and reaches the design value. Then a lot of air bubbles (diameter: 20 ~ 50um) coming out from the wall in the smoke state. They rise very slowly and oxygen dissolve effect is remarkable. Thus it can dramatically improve the oxygen content in the water. Then increasing the mobility of water and improve the density of aquaculture.
Material: NR&PE compound
Aeration Hose Specs:
Outer diameter: 10-28mm
Wall thickness: 2mm above
The bubble diameter: 20-50um
Dynamic power: 02 / kw. Hr
The air flow: 3-12 cubic meters/HRM
Applicable water depth: 0-6 meters
Applications:
Aerator tubing is used to make the dissolved oxygen in the water reach higher amount and enhance the air density. Apply to aquaculture, sewage treatment, garden irrigation and greenhouse.
Aeration Pipe Advantages:
First, air diffuser hose is easy to install and assembly. At the bottom of the pond, it combines with the oxygen deliver hose. Then you don’t need other equipment. Therefore, the cost of hose and assembly will be lower than other methods.
Second, such hose can be bent at willing. At the same time, there will never be leakage problem. In another hand, such hose has a small volume. Thus it is very easy to transport. Besides, the freight is low.
Third, Aeration hose expands when it is fill with air. While it keeps flat after the air released. When it is flat, the micro holes closed. Then it will stop the air release. Thus there will never be block problem.
Last, both of the inner and outer wall are smooth. Thus there will not be impurity or microorganism stick on. What’s more, you can control the air volume by computer.
