When people use PVC water belt , they are not paying attention to many problems. It is easy to cause some problems. For example, the water belt will have some water stains when it is used. If these problems are not noticed, it is easy to cause a sudden drop in the life of the hose.
The PVC hose for conveying foam must be carefully washed to protect the rubber layer. In order to remove the grease on the water belt, it can be washed with warm water or soap. The frozen water belt should be melted first, then cleaned and dried to prolong the service life of the PVC water belt. The unsealed water belt can not be wound up. Store.
Avoid bending suddenly when laying the hose, so as not to reduce the water pressure resistance. The working pressure should be within the scale specified by the model number of this product. At the same time, the hard weight should be prevented from being pressed on the water belt during the laying. When the vehicle passes through the water belt in the laying, the water belt protection bridge should be placed in advance through the position.
The dirt on the surface of the water belt can be directly removed by toothpaste and detergent. If it is more stubborn, it can be properly immersed in hot water for a period of time, and it will be much easier to clean. Gently wipe the dirt off the plastic surface with a soft cloth dampened with decontamination powder. When the PVC water hose is connected to the interface, it should be covered with a soft protective material; when the water hose is used, it is strictly forbidden to be discounted; do not drag the water hose on the ground.
During the use of the water belt, care should be taken not to contaminate the oil, acid, alkali and other chemicals. Once contaminated, it should be cleaned and dried. Use a better quality water belt in a place closer to the water pump outlet.
The above is the precautions for the use of PVC water hoses for everyone. I hope that everyone can use PVC water hoses correctly to make the water belts have a longer service life.