Orientflex Invites you to our booth in AAPEX
The basic technology of silicone tube bending is rubber mixing processing, cord and canvas processing, rubber tube forming, vulcanization, etc. The processing methods and forming equipment of different structures and different skeletons of the hose skeleton layer need to pay attention before using silicone elbows:
1. Make sure that the product meets the specifications and model of the equipment design.
2. The use must be guided by professional operating technicians. It is not allowed to use ordinary hoses instead of hardware pump tubes, and it is not allowed to connect the front end. When using hardware pump tubes, the curvature must not be too large, otherwise the hoses will be overloaded under pressure, causing loss at their own expense.
3. It must be used according to the marked pressure data. When the internal glue is obviously worn, the flange at the outlet is obviously worn, the pressure is too large, and the pipeline can not be replaced.
4. After use, please do a good job of pipeline cleaning to make the transfer work smoothly.
5. Keep stable and dry to prevent contact with acids, alkalis, oils and organic solvents that affect rubber quality.
In short, the main factors that determine the service life of silicone elbows are the number of compressed silicone elbows; the second factor is the method, strength, and frictional heat of the compressed silicone elbows. To extend the service life of silicone elbows, it is necessary to reduce the number of compressed silicone elbows, reduce damage to the compression method of silicone elbows, and accurate compressive strength. The silicone elbow pump roller compresses the silicone elbow only once-this undoubtedly prolongs the life of the silicone elbow.
Related posts
